I’ve recently started farming Chia using a lot of harddisk space. To me it’s the ultimate system administrators crypto coin since it doesn’t use GPUs and there is a lot involved getting it to run quickly and correctly! This post will serve as an accompanying posts to my videos about the subject.
Category Archives: Uncategorized
4$ Xiaomi Temperature Sensor for Home Assistant
This article is a kind of follow-up on the one I did originally in 2019. ESPhome has improved a lot over time and now there are these 4$ Xiaomi temperature and humidity sensors that can be hacked and then work in the same way. The absolute best way to get per room temperature sensing into Home Assistant in my opinion!
Continue reading 4$ Xiaomi Temperature Sensor for Home Assistant
IP camera ethernet water damage, how to repair
As some of you know, I have some IP cameras in my backyard. One of them went offline recently and didn’t come back online. Upon inspecting the connection point between the camera ethernet connector and the patch cable had completely fried because of water damage. Can this Dahua camera still be revived? Let’s replace the ethernet connector and see if it still works!
Continue reading IP camera ethernet water damage, how to repair
Home Assistant: Automated Bathroom Ventilation
Even since we’ve lived in our new house I have wanted to create a sort of “automatic” bathroom ventilation. Our central ventilation box has a feature that can be used for that but we needed hooked it up. But, combining two of my recent Home Assistant videos it’s actually quite easy now, let’s build it and throw some Node-Red into the mix too! 😀
Continue reading Home Assistant: Automated Bathroom Ventilation
IPcam: Nx Witness full install demo on cheap/low-power NVR hardware
This article is an accompanying article for my video about installing Nx Witness on low-power and cheap hardware, go check it out! Continue reading IPcam: Nx Witness full install demo on cheap/low-power NVR hardware
Intermittent Technology 2019 update
It’s been a bit quiet around here, there are two main reasons for that. The first is that I’ve been focussing on my YouTube channel a lot, the second is that I’ve been putting time and energy in creating a new website http://quinled.info.
Review: Edifier S1000DB speakers
I’ve been using some crappy Philips speakers in my garage for the longest time now. Since I often sit there for quite a while to tinker and record videos, I like listening to music. Time for an upgrade!
Full Load Review: Juiced 2.0 Power Bank Charge base
Recently I was approached by a company who had a kickstarter going for their product, the Juiced 2.0. They offered me a free sample and I decided to subject it to one of my full load reviews!
Continue reading Full Load Review: Juiced 2.0 Power Bank Charge base
Full Load Review: ROCK 2-in-1 5000mAh Power Bank + Charger (RMP0372)
In looking for items to review I found this power bank + charger combination on Aliexpress and it looked quite interesting. I decided to buy it and subject it to my full load review test!
Continue reading Full Load Review: ROCK 2-in-1 5000mAh Power Bank + Charger (RMP0372)
ESP8266 LED Lighting: Using QuinLED with Domoticz
Today we’re going to take a look at using QuinLED with Domoticz. First I’ll take you along while we install Domoticz on a Fedora 25 Server and then we configure it work with QuinLED. Continue reading ESP8266 LED Lighting: Using QuinLED with Domoticz